648,00 € Prix de vente conseillé
550€ 80 TTC 15%
459,00 € Iva escl.

Engine - Engine type : QQDC_DURATEC


Livraison gratuite sur les pièces pour une expédition en France métropolitaine


N°1 de la pièce d’occasion contrôlée et expertisée


Pièces garanties 2 ans (sauf moteurs et boites de vitesses : 1 an)


Paiement sécurisé via CB ou PAYPAL


Provenance 100% France


Commande expédiée le jour même

The entire staff of GPA, automobiles recycler based in Livron sur Drôme (France), welcomes you on our web shop. Our daily challenge is to provide the larger possible choice for low-priced, high quality warrantied automobile and motorcycle used parts. Thanks to the GPA web shop, you will never waste your time again searching for your part in a junkyard!

Here are all the information you will need to choose your Engine FORD FOCUS C-MAX 1 PH.1

Characteristics of your Engine :

  • Mileage (Km) : 175329
  • GPA Tag number : 402274243
  • OEM Number : (A number starting with NC means we do not know the OEM Number and replaced it with our internal tag number)
  • Estimated delivery time : 1 or 2 business days (Mainland France), delivered by national carrier

Tests, quality checks and warranty :

  • By the specialized disassembler : Yes
  • By the quality manager : Yes
  • Duration of the warranty : Two-year warranty (excepted for engines and gearboxes : one-year warranty)

All our engines are controlled, tested, cleaned and covered by a one-year warranty. Feel free to contact us by email or webchat if you want our assistance to select an item. The quality of our used engine also depending on the quality of its assembly, please do so in accordance with the few elementary rules listed hereafter.
1. General recommendations:

Upon delivery, make sure the engine perfectly fits your needs. Some peripheral parts might be different, so make sure to replace them by yours to avoid losing time once the engine is in its compartment.

About the warranty covering this QQDC_DURATEC : the engine may be delivered with peripheral parts provided for free (EGR valve, turbo, injection system, etc.) which are not under warranty. The warranty is applicable to the engine block only.

Always start by finding the cause of the failure that caused your engine to break and solve it, so it doesn’t repeat with this GPA engine!

Cleaning the engine compartment will make the assembly work easier and more enjoyable!

The openings of our engines are sealed with plastic plugs. Make sure to remove them all to avoid any problem when you first start the engine.

Make sure every bolt and nut are tightened to the torque recommended by FORD, and keep in mind that some are not reusable.

The crankshaft pulley must be carefully replaced. Make sure you do not push the pin back. Tighten the central bolt with a torque wrench to the recommended torque and do not hesitate to replace it by a new one if needed. In this case, also check the pulley and replace it by a new one in case of doubt.

2. Cooling system:

Radiator, fan, sensors, expansion tank, hoses and clamps must be checked carefully.

Purge the cooling system and fill it back with the adapted coolant, never with water.

Always replace the thermostat and the water pump with new ones.

3. Fuel supply:

A malfunctioning fuel supply will have negative effects on the engine. If the fuel/air mixture is too rich, it will not only cause a high fuel consumption but also a premature deterioration of the cylinders and compression rings. A mixture that is too lean will cause overheating.

Replace the air filter by a new one, since the previous one might be dirty or clogged and induce high fuel consumption and even damage the engine.

Check for the presence of foreign matter in the intake, and replace the intercooler if necessary.

Fuel filters must be replaced, any dirt might damage the injection pump or the injectors. A clogged filter will result in a lack of pressure in the fuel supply and might cause overheating and damage the pistons.

4. Exhaust: simply verify that it is not obstructed.

5. Lubrication: the oil filter must be replaced by a new one and the oil used must comply with the recommendations of FORD for their QQDC_DURATEC engines.

6. Timing belt: the timing belt kit of your FORD FOCUS C-MAX 1 PH.1 1.8I 16Vmust be replaced by a new one and assembled following the instructions of FORD. The accessory belt, idlers and tensioners must be replaced if necessary.

7. Ignition or preheating system: replace the plugs with new ones.

8. Before engine start-up: After assembly, check the oil level, bolts and nuts tightening, belt tension, that there is no air in the cooling system and that its level is correct.

Start up the engine and check the oil pressure and coolant temperature.
That’s all folks! Everything should go well! Let’s get back to this engine… p>

Characteristics of the FORD FOCUS C-MAX 1 PH.1 from which we collected your Engine :

  • Brand : FORD
  • Model : FOCUS C-MAX 1 PH.1 1.8I 16V
  • Body : 5 Doors
  • Year : 25-11-2004
  • Fuel : Petrol
  • Engine type : QQDC_DURATEC
  • Gearbox type : 4M5R7002NA - 5 manual
  • Cylinder : 1798
  • Horsepower : 122
  • Color : GRIS
  • Color code : NC
  • Type identification code (CNIT) : MFD14D2SV935

We hope the description of this part is precise enough for you to confirm your choice. If you have additional questions or want to make suggestions to help us improve our web shop, please feel free to contact us by email or phone.

If this is not the item you need, do not forget that we have tens of thousands of low-priced, warrantied used car parts and used motorcycle parts in our stock and one of those will probably fit your needs!

And finally, thank you for visiting the GPA web shop: undoubtedly the best value for money for warrantied used car parts and used motorcycle parts! Tell your friends about it! And don’t forget to leave an evaluation after you ordered, this will help us improve and congratulate our teams.
Thanks to you and your trust, GPA is no longer a regular dismantler: we are automobiles recyclers, producers and distributors of used parts coming from the circular economy!
Oh, one last thing… Know that our profession is highly regulated, and that’s for the better!
Here’s the number of our prefectural agreement allowing us to work, disassemble and sell used car parts: PR 260026 D. Never buy used car parts from a business that does not display it! In addition, GPA received the ISO14001 certification for environmental compliance and the ISO9001 certification for its quality approach.

Riferimenti Specifici